Leather should be familiar to everyone. It is a very common material in life, which will be used in many aspects, such as clothes, shoes, bags, household products, car interior, etc. the popularity is also growing, and the demand is also increasing.
Of course, in this trend, it also allows a number of leather manufacturers to develop. The shortcomings of manual cutting are the development and update of CNC cutting machine. Now, more and more manufacturers use cutting machine to cut leather.
Blade cutting machine is now used more, but because of some shortcomings of laser, now the manufacturers of flexible materials use less and less, blade cutting machine should be the first choice.
Recommended products:
Support automatic typesetting and manual typesetting. Equipped with double cutting head and double working table, it is suitable for cutting half piece cow leather, and widely used in men's shoes and handbag products industry.
Machine parameters:
|
机器型号
Machine Model
|
IC455DH
|
IC650DH
|
|
机器尺寸（LXWXH)
Machine dimension
|
4500X2300X2700mm
|
6500X2300X3100mm
|
|
双区域切割范围
Double working areas
|
1650X1500mmX2
|
2800X1500mmX2
|
|
功率
Power
|
11.5KW
|
15KW
|
|
3-phase 200-400VAC/50-60HZ/Monopase 200-240VAC/50-60HZ 2KW
|
|
气压
Air consumption
|
4-6pa
|
|
最大切割速度
Maxzimum cuting speed
|
84米/分钟（约3308 inches/min )
|
Why is the blade cutter the best choice for leather cutting? Let's have a look!
First of all, the efficiency of manual cutting is too slow. I don't need to say more about this. You can also think of it. There is also the waste of materials. If we cut them manually, we can't do so accurate material drawing, and there will be a lot of leftovers. At the same time, the cost of human resources has increased significantly, while the cost of automatic production line has decreased significantly. The cost advantage makes the enterprise choose the production line with high degree of automation first when expanding production, and has the power to transform the original production line.
Then, the laser cutting machine used friends will have a certain understanding, laser cutting is using high temperature, cutting speed and cost are no problem. The flexible materials like leather are not so perfect. On the one hand, the flexible materials are relatively soft. The high temperature of laser will damage the materials and bring unnecessary losses. Some of them will leave bad smell. On the other hand, the laser has certain pollution to the environment, which is not the most environmentally friendly.
Therefore, to sum up, it's better to choose the blade cutter. This is also the feedback from Yida customers. It's only after using the blade cutter that we know it's so easy to use.
